TREADMILLS MOD. 870A/870S/870C
Rev.1/01.07.2019
© Medisoft RAM Italia S.r.l.. All rights reserved.
8
WARNING !
Medisoft RAM Italia S.r.l. takes no responsibility for any accidents or
any damages caused to people or things due to a connection of the
treadmill to an electric outlet in non-compliance with current laws and
safety norms.
1.6
ELECTROMAGNETIC COMPATIBILITY
This device was designed and built to meet all the requirements and standards
of Norm EN 60601-1-2 and was found in compliance with all such norms and
standards.
EN 60601-1-2:
Medical electrical equipment - Part 1: General requirements for
safety
– Collateral standard: Electromagnetic compatibility – Requirements and
tests.
Nevertheless, in particular conditions, some interferences may arise. In order to
insure that the equipment operates correctly and performs as expected, the
Manufacturer invites the end user to focus attention on all special features of
the equipment discussed so far, and all that will follow, including all warnings
and recommendations that are often indicated by visually understandable
“warning” and “caution” tags.
It is the client/customer/end user’s responsibility to handle the equipment in
such a way as to be in full compliance with all indications provided by the
Manufacturer, in order to insure that the equipment will perform as expected
and guarantee safety as it operates in compliance with intended use.
The client/customer/end user must keep in mind that the utilisation of wireless
portable devices (such as cellular phones, cordless phones, walkie-talkies) can
interfere with operating functions of the equipment itself. To avoid
electromagnetic interferences it is important to keep a safe minimum distance
between the portable and RF communication devices and the treadmills model
no. 870 A, 870 S and 870 C, as recommended in the following Table 1 -
Immunity to RF.
