15
METER MEMORY
The meter stores the 1000 most recent blood glucose test results
along with respective dates and times in its memory. To enter the
meter memory,
start with the meter switched off
.
Reviewing Test Results
1.
Press and release M or
▲
.
“
” will appear on the display and the first reading you see is
the last blood glucose result along with date, time and the
measuring mode.
2.
Press
▲
or
▼
to recall the test results stored in the meter each
time you press.
Press and hold
M
to switch off the meter.
Reviewing Blood Glucose Day Average Results
1.
Press and release
▼
to enter memory mode for average results
with “ ” and “ ” displayed on the screen. Release
M
and then your 7-day average result measured in general mode
will appear on the display.
2.
Press
▲
to review
14-, 21-, 28-, 60- and 90- day average
results stored in each measuring mode in the order of Gen, AC,
then PC.
3.
Exit the meter memory.
Keep pressing the
M
and the meter will turn off after displaying
the last test result.
NOTE:
⚫
Any time you wish to exit the memory, keep pressing
M
for 3 seconds or
leave it without any action for 3 minutes. The meter will switch off
automatically.
⚫
Control solution results are
NOT
included in the day average.
