DRW-015 (GPI171)
Revised: 11/23/09
10
Backrest Assembly
1.
Insert backrest into designated slot so that push-buttons are facing outward
(see Figure A)
.
2.
Push buttons in and continue to insert backrest until buttons securely lock into
holes
(see Figure B)
.
Please note:
There are 2 positions for the back rest. Adjust
according to your preference, but make sure both push buttons are protruding and
at the same level.
Notes:
Make sure the brakes are locked
before
you lean against backrest.
Make sure push-buttons are completely protruding
before
leaning
against backrest.
Figure C
Figure B
Figure A