10 MEDLINE
| MDS86835DSHEC | PIC-00311 (Rev: 10-20-16)
Backrest Assembly
1.
Insert backrest into designated slot so that push-buttons are facing outward
(see Figure A)
.
2.
Push buttons in and continue to insert backrest until buttons securely lock into
holes
(see Figure B).
Please note:
There are 2 positions for the back rest. Adjust
according to your preference, but make sure both push buttons are protruding
and at the same level
(see Figure C)
.
Notes
: Make sure the brakes are locked
before
you lean against backrest.
Make sure push-buttons are completely protruding
before
leaning
against backrest.
Figure A
Figure B
Figure C