www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com
10267_20181113
Float Arms / Floats
The SolarBee contains 3 float arms and 3 floats.
The float arms allow vertical positioning of the
machine and the floats provide buoyancy.
Float Arms
- The float arms are constructed of
stainless steel components. They connect the
floats to the central machine structure. Each float
arm has a sturdy turnbuckle. The turnbuckles can
easily be rotated to adjust the vertical height of
the distributor dish. Lengthening the turnbuckle
(rotating clockwise) will raise the lip of the
distributor dish, whereas shortening the turnbuckle
(rotating counter-clockwise) will cause the lip of
the distributor dish to lower.
The turnbuckle and float arm structure
components are constructed with robust stainless
steel materials allowing the SolarBee to operate
in severe environments without being damaged.
The turnbuckle is self locking. Simply rotate the
handle to expand or collapse the turnbuckle for
dish depth adjustment.
It is important to check the distributor dish depth
routinely. The SolarBee naturally drops into
the water over time due to biomass buildup
and trapped air escaping from the hose. If the
distributor dish lip is too high, the water coming off
the lip may become turbulent and the flow rate of
the machine may be reduced.
Features
Features
SB5000
Turnbuckle
Float Arm
Handle
1 inch to 1-1/2 inch (2.5 cm to 3.8 cm)
Distance Between Distributor
Dish And Water Level
O&M_SB5000_20181113 - 12
