www.medoraco.com | 866 - 437 - 8076 | info@medoraco.com
10267_20181113
Digital Controller
- The digital controller is
located near the top center of the SolarBee.
The digital controller can be easily accessed by
opening the PV module gate directly above and in
front of it. The digital controller is constructed with
a NEMA 4X (IP 66) Enclosure.
All solar energy collection and motor operation are
managed by the digital controller. This component
has two primary functions: (1) To direct and divide
the power being collected by the PV modules
between the brushless motor and battery. (2) To
serve as the main control center that operates the
brushless motor.
There are 3 PV module connections located
on the front face of the digital controller. If the
onshore power accessory was purchased, a
connection will be located on the right side
face. The onshore connection is used only in
applications where onshore grid power is desired.
The left side face of the digital controller
contains the brushless motor connection, battery
connection, and On/Off switch. The On/Off switch
activates power to the motor. When the switch
is turned to the Off position, the motor will not
operate. The charging function of the controller
will continue to charge the battery even when the
switch is turned off.
Front Face Of Digital Controller
Left Side Face Of Digital Controller
Features
Features
SB5000
Digital Controller
O&M_SB5000_20181113 - 7
