853591-1_AIR-I-MTINI-1 Avant AIR+ Installation Manual
17
Effective Date: 12-08-2017
Symbols that may be used:
Read the instruction
manuals for safe usage of
the device. (operating
instructions)
or SN Indicates that the
device serial number will
follow.
Read the instruction
manuals for safe usage of
the device (operating
instructions).
Temperature limitation
Type B applied part. (Type B
equipment)
C
lass II equipment
Manufacturer (MedRx)
Microphone
Start (of action)
Stop (of action)
Non-ionizing
electromagnetic radiation
Authorized Representative
in Europe
Special Disposal Required.
Percentile Setup
Humidity Limitation
Calibration
Loudspeaker (Speaker)
Caution, General warning
sign
Headphones
Handheld microphone
(Talkback Microphone)
Recording
Recommended Procedures for Cleaning and Disinfection
1.
Foam ear tips are single use components, and should not be re-used by another patient.
2.
It is recommended that 70% Isopropyl Alcohol should be applied to a soft clean cloth or tissue, not
directly on the component to be cleaned. The cloth should never be wet, just damp. A mild soapy
water solution is an alternative cleaning liquid.
3.
To ensure that cross contamination does not occur, use clean cloth or sealed Alcohol swabs for
each device to be cleaned.
4.
Wipe the surfaces of the Operator headset and headphone pads with the 70% Isopropyl Alcohol.
Clean other transducers in the same way.
Do not let 70% Isopropyl Alcohol or water enter the
microphone sound inlet.
5.
The white device housing may also be wiped with 70% Isopropyl Alcohol. The speaker controls,
headphone ear pads, head band and other components may be cleaned in a similar way.
6.
Let all components that have been cleaned, thoroughly dry before use.
7.
Cleaning of the computer should be performed using the methods suggested in the computer’s
manual.
