12
U Manual
•
UVP-I-MULVAC-1
Effective 12-09-16
TROUBLESHOOTING GUIDE
SYMPTOM
REMEDY
Won’t come on.
Vacuum Wand not
working.
Drying Chamber
not working.
-Check fuse located on rear panel.
-Call for service.
-Check that the Drying Chamber
switch is in the Vacuum Wand
setting.
-Check to make sure hose is
connected properly in panel.
-Check to make sure filter is
properly attached and not blocked.
-Check to make sure tips on either
hose are not blocked, use the
pressure function to clear tip.
-Call for service.
-Ensure that the switch is in the
CHAMBER position.
-Check to make sure vacuum cup
does not leak around pad or has
any cracks.
-Call for service. 888-392-1234
Caution:
To avoid the risk of electrical shock or serious injury
do not remove the white cover of this equipment. Service should
be performed by factory trained and authorized personnel.
