Medtronic Battery Support System 2, Operating Instructions Manual

4-4

Battery Support System 2 Operating Instructions

Battery Support System 2 

REPLACEMENT PARTS AND ACCESSORIES

In the USA, call 1.800.442.1142 to order parts and accessories. Outside the USA, contact your local 
Medtronic sales or service office.

SPECIFICATIONS

Table 4-3

 lists the specifications for the Battery Support System 2.

Table 4-2   

Replacement Parts and Accessories

Description

Part Number

Battery Support System 2 Operating Instructions

3010515

Battery Support System 2 Service Manual

3011409

LIFEPAK NiCd Battery

3009376

LIFEPAK SLA Battery

3009378

FASTPAK 2 Battery

3009375

FASTPAK Battery (white)

9-10424-18

FASTPAK Battery (gold)

9-10424-19

AC Input Power Cord

803650

Battery Support System 2 Wall Mount Bracket

3010932

Table 4-3   

Battery Support System 2 Specifications

*

* All specifications are at 20°C unless otherwise stated.

**

 Catalog Number 99407-000018

Function

Description

General Specifications:

Dimensions

31.5 cm x 37.6 cm x 9.7 cm (12.4 inches x 14.8 inches x 3.8 inches) 

Weight

8.2 kg (< 18 pounds) (excluding batteries)

Number of battery wells

3. Charging, conditioning, and shelf-life test capability in all battery wells.

Power requirements:

100/120/220/240 + 10%, 50/60 Hz + 3 Hz

Fuses

Two fuses in the power input module (5 x 20 mm T 250V, Low or High break 
capacity) per IEC 127-2, sheet 1 or 2, such as Bussman GDC, Littelfuse 
218, or Schurter FST.

100/120 Volt Input: 1.6 Amp (T, or Time-Lag)
220/240 Volt Input: 0.8 Amp (T, or Time-Lag)

Environmental Specifications:

Liquid Ingress

IPX0 per IEC529. Not protected against ingression of fluids. Indoor use only.

Altitude, operating

To 4,572m (15,000 feet)

Altitude, non-operating

To 5,500m (18,045 feet)

Humidity

0 to 95%

Temperature, operating

Temperature, storage

5° to 45°C (41° to 113°F) (commercial)

0° to 50°C (32° to 122°F) (military configuration)**

-40° to 70°C (-40° to 158°F) (commercial)

-46° to 71°C (-51° to 160°F) (military configuration)**

Vibration

IEC 68-2-6 (commercial)

Military Configuration:

**

USAF: MIL-STD-810F Method 514.5, Jet Aircraft (Figure 514.5C-6 and 
Table 514.5C-VIII (General Exposure), 3.54 Grms, 30 min/axis) and 
Turboprop (C130 curve, 4.87 Grms, 60 min/axis)

USAARL: MIL-STD-810E Method 514.4 (1.58 Grms, 60 min/axis)