EN
52
TECHNICAL DATA
Rated voltage
DC 18 V
Speed no load
8000 rpm
Spindle thread
M14
Grinding/Cut-off disc’s outer diameter
115 mm
Grinding/Cut-off disc’s hole diameter
22 mm
Noise
Sound pressure level
L
PA
= 78.50 dB(A), K
PA
=3 dB
Sound power level
L
WA
= 89.50 dB(A), K
WA
=3 dB
Vibration
Vibration for surface grinding
a
h
, AG= 7.54 m/s² K=1.5 m/s²
Always wear ear protection!
The declared vibration value, which has been measured by a standardised test method, can be used
to compare different tools with each other and for a preliminary assessment of exposure.
WARNING: The actual vibration level when using a power tool can deviate from the specified
maximum value, depending on how the tool is used. It is therefore necessary to determine which
safety precautions are necessary in order for the user, based on an estimate of exposure in actual
operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is
switched off and when it is run without load, in addition to the start-up time).
