Meec tools 008554, Operating Instructions Manual

EN

31

•  If the power cord or plug get damaged 

they must be replaced by an authorised 
electrician.

•  Check that the product is clean and free 

from contamination.

•  Follow all the directions for care, 

maintenance and storage.

•  Check the power cord and plug at regular 

intervals. If the power cord or plug get 
damaged they must be replaced by an 
authorised electrician.

•  Check any extension cords are regular 

intervals. Replace damaged extension cords.

•  Keep the handles clean, dry and free from 

oil and grease.

•   Always unplug the product when it is not 

in use, before service and maintenance, 
and before changing tools.

•   Avoid accidental starting. Check that the 

power switch is in the OFF position before 
plugging the plug into a power point.

•   Always use the correct type of extension 

cord.

•  If the product is used outdoors, only use 

an extension cord approved for outdoor 
use.

•  Stay alert at all times. Use your common 

sense. Never use the product if you are 
tired or under the influence of drugs, 
alcohol or medication.

•   Check that the product is undamaged.
•  Check before using the product that it is 

working normally as described in these 
instructions.

•  Check that all moving parts are 

undamaged, correctly fitted and that they 
do not jam.

•  Damaged safety devices must be replaced 

by an authorised service centre, unless 
otherwise specified in the instructions.

•  A damaged power switch must be 

replaced by an authorised electrician.

•  Do not use the product if it cannot be 

switched on and off with the power switch.

SAFETY INSTRUCTIONS

•  Keep the work area clean and tidy. 

Cluttered work areas put safety at risk.

•  Do not expose the product to rain or 

moisture.

•   Do not use the product in damp or wet 

areas.

•   Keep the work area well lit.
•   Do not use product where combustible 

gas or liquids are stored or used.

•   Avoid the risk of electric shock. Do not 

touch earthed objects, such as water 
pipes, radiators, hot plates or cookers.

•   Keep other people and pets at a safe 

distance.

•  Persons not involved in the work should 

be kept at a safe distance from the work 
area and do not allow anyone, especially 
children, to touch the product or the 
power cord.

•   When not in use, store the product in a 

dry place, locked up and out of the reach 
of children.

•   Do not overload the product. The work 

will be safer and better if the product is 
not overloaded.

•   Wear suitable clothing. Do not wear 

loose-fitting clothing or jewellery.  
They can get caught in moving parts.

•  Wear non-slip shoes when working 

outside.

•  Wear a hair net if you have long hair.
•   Use personal safety equipment.
•  Wear safety glasses.
•  Wear a breathing mask or dust filter mask 

if the work produces a lot of dust.

•   Protect the power cord from damage,  

and replace a damaged cord immediately.

•  Do not pull the power cord to unplug the 

plug from the power point. Keep the 
power cord away from heat, oil and sharp 
edges.