EN
32
SYMBOLS
Read the instructions.
Safety class II.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Rated output
1500 W
Torque
58 Nm
Stroke rate
4200 rpm
Percussion force
6 J
Chuck
Ø 48 mm
Tool holder
SDS+
Drilling capacity
Wood: 40 mm
Steel: 18 mm
Concrete: 32 mm
Weight
5.2 kg
Cord length
2.2 m
Sound pressure
level, LpA
90.7 dB(A), K = 3 dB(A))
Sound power
level, LwA
101.7 dB(A), K = 3 dB(A))
Vibration level*
15.816 m/s², K = 1.5 m/s²
Vibration level**
13.645 m/s², K = 1.5 m/s²
* ah, HD = percussion drilling in concrete
** ah, CHeq = chiselling
Always wear ear protection.
The declared values for vibration and noise, which
have been measured according to a standardised
test method, can be used to compare different
tools with each other and for a preliminary
• Use the support handle, if the tool is
supplied with one. Otherwise, you could
lose control of the tool and be injured.
• Hold the power tool by the insulated grips
when working in areas where the tool
may come into contact with concealed
electrical cables or its own power cord.
Contact with a live cable will cause the
metal parts on the tool to also become
live and give the user an electric shock.
REDUCTION OF NOISE AND
VIBRATIONS
• Plan the work so that exposure to heavy
vibrations is spread over a longer period.
• To reduce noise and vibrations when in
use, limit the time the tool is in use, and
use low-power/vibration mode and
suitable safety equipment.
• Take the following precautions to
minimise the risks of exposure to
vibrations and/or noise:
– Only use the tool in accordance with
these instructions.
– Check that the tool is in good
condition.
– Use accessories in good condition,
and which are suitable for the
purpose.
– Keep a firm grip on the handles/
grips.
– Maintain and lubricate the tool in
accordance with these instructions.
