Meec tools 016793, Operating Instructions Manual

EN

19

•  Avoid inhaling welding fumes/gas, use 

exhaust extraction and ensure good 
ventilation of the workplace.

•  Welding sparks can cause fires or 

explosions. 

•  Keep flammable material at a safe distance 

from the work area.

•  Do not carry out welding on containers that 

have contained flammable material.

•  UV radiation from arcs can cause burn 

injuries. 

•  Use welding goggles, ear protection and 

protective clothing. Make sure that the 
workplace is well shielded in order to not 
expose onlookers or passers-by to UV 
radiation and welding spatter.

•  Avoid using the product in damp conditions 

or rain.

SYMBOLS

Read the instructions.

Approved in accordance with 
the relevant directives.

Recycle discarded product 
in accordance with local 
regulations.

Warning: Risk of electric shock.

TECHNICAL DATA

MMA

TIG

MIG

Voltage (VAC)

230

230

230

Phases

1

1

1

Frequency (Hz)

50Hz

50Hz

50Hz

Working 
temperature

40°C

40°C

40°C

SAFETY INSTRUCTIONS

Read all warnings, safety instructions and 
other instructions carefully before use. Failure 
to follow all the instructions and safety 
instructions can result in the risk of electric 
shock, fire and/or serious personal injury.

•  Electrical installation must only be carried 

out by an authorised electrician – risk of 
personal injury and/or death as a result of 
electric shock. Never touch live parts. The 
product must only be connected to an 
earthed power point.

•  Leave enough free space around the 

product to ensure the circulation of cool air 
through the ventilation openings on the 
front and back. Keep the area around the 
product free from sand, soil, dust and other 
debris that can be sucked in through the 
ventilation openings. Failure to follow these 
instructions can result in overheating and 
damage to the product.

•  Avoid grinding so that particles are directed 

towards the product. Metal particles are 
conductive and can result in malfunctioning 
and damage if they penetrate the product.

•  Do not stack the product. 
•  Never underestimate the weight of 

equipment to be handled, loaded or 
unloaded, or go or stand under a 
suspended load, or lift or load over persons 
or animals Dropped equipment can cause 
personal injury. Never lift the product with 
the gas cylinder installed.

•  Place the product on a smooth, level and 

stable surface.

•  Never touch live parts or welding 

electrodes, especially not with wet hands or 
parts of the body, or with wet clothes. 

•  Always make sure that no part of the body 

is earthed – risk of electric shock if your 
body is earthed. 

•  Always wear dry, insulated gloves. 
•  Vapour and gas produced during welding 

can be dangerous or harmful to health.