EN
16
NOTE:
Use a suitable cutting fluid and twist back the tap half a turn
for each full turn clockwise to ensure that the threading is
effective.
– For blind holes, set the position for the depth adjustment
collar (1) on the installation tool (2) so that the tap does
not seat and stick out over the upper surface of the
thread hole. Make sure that the thread insert tang (A)
comes in the slot in the installation tool (2).
FIG. 2
5. Twist the insert in the hole to the requisite depth and remove
the installation tool (2).
6. Use a suitable punch and hammer to remove the tang.
MAINTENANCE
CLEANING
Wipe the tools and thread inserts after use to clean them from
oil, dirt and shavings. Do not wash with degreaser.
STORAGE
Store the parts in the metal box.
Summary of Contents for 018722
Page 3: ...2 1 3 4 5 1 ...
Page 4: ...2 A ...
