ENGLISH
36
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use.
Save these instructions for future reference.
GENERAL SAFETY INSTRUCTIONS
WARNING:
Read all warnings, safety instructions and other directives. Failure to follow all the
instructions and safety instructions can result in the risk of electric shock, fire and/or serious personal
injury.
The term "power tool" in all the warnings below refers to your mains-powered (corded) or battery-powered
(cordless) power tool.
Work area
Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents
and injuries.
Do not use power tools in explosive environments, such as in the vicinity of flammable liquids,
gases or dust. Power tools produce sparks that can ignite dust and fumes.
Keep children and onlookers at a safe distance when using power tools. You can easily lose
control of the tool if you are distracted.
Electrical safety
The mains plug on the power tool must match the mains outlet. Never modify the plug in any way.
Never use an adapter with earthed power tools. Unmodified plugs and matching outlets reduce the
risk of electric shock.
Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There
is an increased risk of electric shock if your body is earthed.
Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets
into a power tool.
Be careful with the power cord. Never use the power cord to carry or pull the power tool, or to pull
out the plug from the mains socket. Never use the power cord to carry or pull the power tool, or to
pull out the plug from the mains socket. Damaged or tangled power cords increase the risk of
electric shock.
If using the tool outdoors, only use an extension cord approved for outdoor use. Cords intended for
outdoor use reduce the risk of electric shock.
If it is absolutely necessary to use power tools in damp conditions, use a mains connection
protected by a residual current device. Using an RCD reduces the risk of electric shock.
Personal safety
Stay alert. Pay attention to what you are doing, and use your common sense when working with
power tools. Never use power tools if you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention when using a power tool can result in serious personal injury.
Use personal safety equipment. Always wear safety glasses. Depending on the type of power tool
and how it is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets
and ear protection reduce the risk of personal injury.
Avoid accidental starting. Check that the power switch is in the OFF position before plugging in the
power cord and/or the battery, or lifting/carrying the tool.
Carrying a power tool with your finger on the switch, or connecting a tool to the mains supply when
the switch is in the ON position, increases the risk of accidents and injuries.
Remove Allen keys/spanners etc. before starting the power tool. Allen keys, or the like, left in a
rotating part of a power tool can cause personal injury.
Do not overreach. Always maintain a firm footing and good balance. This will ensure you have
better control over the tool in unexpected situations.
Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in
moving parts.
If dust extraction and dust collection equipment is available, this should be connected and used
correctly. The use of such devices can reduce the risk of dust-related problems.
Summary of Contents for 020-186
Page 46: ......
