EN
21
Electrical safety
• The product must only be connected to a
correctly installed and earthed power
point.
• The product must be connected to the
mains with a residual current device of
max 30 mA.
• Check that the mains voltage corresponds
to the rated voltage on the type plate.
• Do not touch the plug or power cord with
wet hands or other wet parts of your body.
Do not pull the power cord to unplug the
plug.
• Keep the power cord away from heat, oil,
sharp edges and moving parts. Avoid
bending, clenching, dragging or driving
over the power cord.
• Do not carry or pull the product by the
power cord.
• Always check the power cord and plug
before they are used.
• Pull out the plug immediately if the power
cord or plug get damaged. Do not use the
product if the power cord or plug are
damaged.
• Pull out the plug when the product is not
in use.
• Check that the power switch is in the OFF
position before plugging in the plug.
• Switch off the product before pulling out
the plug.
• Switch off the product and pull out the
plug before transporting.
SYMBOLS
Read the instructions.
Approved in accordance with
the relevant directives.
Safety class II.
Recycle discarded product
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
230 V ~ 50 Hz
Output 90 W
Working temperature range
180 – 480°C
DESCRIPTION
Front
1. Large display
2. Menu button
3. UP button
4. DOWN button
5. BACK button
6. Connection for soldering iron
7. Hot key
FIG. 1
Back
8. Mains connection
9. Fuse
10. Power switch
FIG. 2
11. Heating element
12. Soldering tip
13. Sleeve
FIG. 3
PACKAGE CONTENTS
• Station unit
• Soldering iron
• Stand (with sponge and cleaner)
Summary of Contents for 021838
Page 3: ...1 2 1 2 3 4 5 6 7 10 9 8 ...
Page 4: ...3 1 12 13 ...
