26
DESCRIPTION
1.
Power switch
2.
Support handle
3.
Spindle lock
4.
Angle stop
5.
Scale for angle adjustment
6.
Knob for adjusting the cutting depth
7.
Clamping screw to adjust angle
8.
Clamping screw to adjust height
9.
Knob to adjust height
10.
Scale to adjust height
11.
Base plate
12.
Connection for dust bag
13.
Dust bag
14.
Motor unit
OPERATION
Use
The tool is intended for cutting slots in materials such as wood, plywood, particle and fibre boards,
plexiglass and artificial marble. The tool is not intended for commercial use.
Adjusting the cutting depth
1.
Move the motor unit (14) as far back as possible.
2.
Adjust the cutting depth with the adjusting knob (6).
3.
Move the motor unit forward and check that the pin goes in the slot in the adjusting knob.
Adjusting the cutting angle
Adjust the cutting angle by undoing the clamping screw (7) and moving the angle stop (4) to the required
angle.
