20
ENGLI SH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use.
Save these instructions for future reference.
Symbols
Read the Operating Instructions carefully before use
Risk of burns.
Warning
– electricity.
Risk of automatic start.
Wear ear protection and safety glasses.
Wear a breathing mask.
General safety instructions
The compressor should only be used in well-ventilated areas with an ambient temperature of +5°C
to +40°C. Do not use in areas exposed to dust, acids, fumes, or explosive or flammable gases.
Always keep the compressor at a safe distance of at least 3 metres from the work area.
Increase this distance if paint splashes on the compressor's plastic cover when painting.
Plug the plug into a suitable power point. The power point must also correspond with the applicable
standards.
Only use extension cords with a maximum length of 5 metres and a cross section of at least
1.5 mm².
Do not use extension cords with different lengths and cross sections. Do not use adapters or power
strips.
Only use the I/O switch to switch off the compressor.
Only use the handle to move the compressor.
The compressor must stand on a stable and level surface when running.
Summary of Contents for 200-073
Page 25: ......
