EN
107
ASSEMBLY
ASSEMBLING GUIDE BAR AND SAW CHAIN
WARNING
The saw chain is very sharp Be sure to wear safety gloves
1
Pull the front handle guard/chain brake towards the front handle to check that the chain
brake is not on
2
Loosen two nuts, then remove the clutch cover and the spacer
3
Hook the chain onto the sprocket While fitting the saw chain around the guide bar, mount
the guide bar to the power unit
A Saw chain
B Guide bar
C Front hand guard/
chain brake
D Starter handle
E Air filter cover
F Air filter lock nut
G Choke knob
H Trigger lock-out
I Rear handle
J Throttle
K Engine switch
L Fuel Tank
M Oil tank
N Front handle
O Guide bar scabbard
P Primer bulb
Q Clutch cover
R Spiked bumper
S Engine
T Spark plug wrench
U File
V Saw chain
W Guide bar
X Guide bar scabbard
S
V
W
X
T
U