EN
46
Start
1.
Insert the collector tank.
2.
Put the interlocking lever for the collector tank in locked position.
3.
Connect the compost shredder to the mains supply.
4.
Start the compost shredder by pressing the I button.
5.
Feed in material.
6.
Switch off the compost shredder by pressing the 0 button.
Emptying the collector tank
1.
Switch off the compost shredder.
2.
Put the locking lever for the collector tank in the unlocked position.
3.
Pull out the collector tank and empty it.
4.
Replace the collector tank.
NOTE:
• Change the direction of rotation several times to release large or hard pieces of wood that have
got stuck.
• Use a pusher and/or a picker hook to remove blockages from the infeed and outfeed openings.
IMPORTANT:
Wait until all moving parts have completely stopped before starting the compost
shredder again.
• Material that sticks out from the infeed opening can be thrown back and forwards when it is
pulled in by the roller. Keep at a safe distance.
• If the roller gets blocked the compost shredder switches automatically to backward rotation so
that the fed material can be pulled out.
• Check the collector pan at regular intervals and empty when necessary.
• Do not feed in too much material at once – risk of blocking the roller and the infeed.
• Feed in garden waste that has lain and wilted for a few days, alternating with branches.
• Do not attempt to shred kitchen waste and the like.
• Branches with leaves must be completely shredded before feeding in new material.
• Always keep the ventilation openings clean and free from blockages.
Summary of Contents for 721-490
Page 49: ......
