EN
44
• Avoid unbalanced and awkward positions when working. Always maintain a
firm footing and good balance.
• This will ensure you have better control over the tool in unexpected situations.
• Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep
your hair, clothing and gloves away from moving parts.
• Loose-fitting clothing, jewellery and long hair can get caught in moving parts.
• If dust extraction and dust collection equipment is available, this should be
connected and used correctly.
• The use of such devices can reduce the risk of dust-related problems.
Use
• Do not overload the tool. Use tools only for their intended purpose.
• The tool does the job better and safer when used at the rate for which it was
designed.
• Do not use the tool if it cannot be switched on and off with the power switch.
• Power tools that cannot be controlled with the power switch are dangerous
and must be repaired.
• Unplug the power cord and/or remove the battery before making any
adjustments, changing accessories or putting the power tool away.
• This prevent accidental starting.
• Store power tools out of the reach of children when not in use. Never allow
children, or anyone who is unfamiliar with the power tool and these
instructions, to use the tool.
• Power tools are dangerous if used by inexperienced persons.
• Keep tools properly maintained. Check that moving parts are properly adjusted
and do not jam, and that no parts are incorrectly fitted or damaged. Check for
other factors that could affect functionality. If the power tool is damaged, it
must be repaired before being used again.
• Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean.
• Properly maintained cutting tools with sharp cutting edges are less likely to jam
and are easier to control.
• Use power tools, accessories, and bits etc. in accordance with these
instructions, with due consideration to the actual working conditions and the
work that is to be done.
• Use the power tool only for its intended purpose.