EN
105
1.
Fit the attachment (H) on the gearbox (K) with the screw (J). Hook the guard (I) on the
attachment and lock in place with the screw (G).
FIT THE BRUSH CUTTER BLADE A, SAW BLADE AND TRIMMER SPOOL
WARNING:
• When fitting the cutter accessory it is very important that the raised part of the top clamp/flange
is correctly positioned in the centre hole of the accessory. If the cutter accessory is fitted
incorrectly this can result in serious personal injury or death.
• Never use cutter accessories without an approved splash guard. An incorrectly fitted or damaged
splash guard can result in serious personal injury.
• If a clearing or grass-cutting blade is to be used the clearing saw must be fitted with a suitable
handle, blade splash guard and harness.
Fitting a brush and saw blade
NOTE: Remember to remove the extension from the splash guard.
1.
Fit the top clamp on the handle (Diagram 1A).
G. Screw
H. Attachment
I. Guard
J. Screw
K. Gearbox
G
H
I
J
K
Summary of Contents for 721-349
Page 101: ...EN 101 Open the choke...
Page 127: ......