EN
114
Fuel mixture ratio
• For JASO FC or ISO EGC grade oil: 1:40 (2.5%) oil to petrol for air-cooled, two-stroke engines.
• For JASO FB or ISO EGB grade oil: 1:25 (4%) oil to petrol.
Petrol, litres
Two-stroke oil, millilitres
2.5 % (1:40)
1
25
5
125
10
250
20
500
Mixing fuel
Always mix the petrol and oil in a clean container intended for fuel.
1.
Always start by filling half the amount of the petrol to be used. Then add the entire amount
of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.
2.
Mix (shake) the fuel mixture thoroughly before filling the brush cutter’s fuel tank.
3.
Do not mix more than one month’s supply of fuel at a time.
4.
If the brush cutter is not used for some time the fuel tank should be emptied and cleaned.
Fuelling
WARNING
• Taking the following precautions, will lessen the risk of fire:
– Do not smoke or place hot objects near fuel.
– Always shut off the engine before refuelling.
– Always stop the engine and let it cool for a few minutes before refuelling.
Summary of Contents for 721-349
Page 101: ...EN 101 Open the choke...
Page 127: ......
