EN
122
Clearing
• The clearing technique removes all unwanted vegetation. Keep the trimmer head just above the
ground and tilt it. Let the end of the trimmer cord strike the ground around trees, posts, statues
etc. NOTE! This technique increases the wear on the cord.
• The cord wears quicker and must be fed forward more often when working against stones, brick,
concrete, metal fences, etc., than when coming into contact with trees and wooden fences.
• When trimming and clearing you should use less than full throttle so that the cord lasts longer
and to reduce the wear on the trimmer head.
Cutting
• The trimmer is ideal for cutting grass that is difficult to reach using a normal lawn mower.
Keep the cord parallel to the ground when cutting. Avoid pressing the trimmer head against
the ground as this can ruin the lawn and damage the tool.
• Do not allow the trimmer head to constantly come into contact with the ground during normal
cutting. Constant contact of this type can cause damage and wear to the trimmer head.
Sweeping
• The fan effect of the rotating cord can be used for quick and easy clearing up.
Hold the cord parallel to and above the area to be swept and move the tool to and fro.
• When cutting and sweeping you should use full throttle to obtain the best results.
Summary of Contents for 721-349
Page 101: ...EN 101 Open the choke...
Page 127: ......
