background image

LIMITED WARRANTY

If the product has a manufacturing defect within 180 days of ship date, 

contact info@meepoboard.com

Each board was tested for at least 20 miles before shipping it out. So it 

is normal to spot some dirt or dust on the board, and certain mileage 

on the remote.

FOR ALL RETURN AND WARRANTY SHIPPING:

Please keep your shipping box. The warranty does not include damage 

from return shipping with lack of package material.

For any concerns regarding your board, please contact Meepo’s 

customer service by going to www.meepoboard.com or by emailing 

info@meepoboard.com.

MAINTENANCE AFTER WET SURFACES 

If you accidently ride in the rain or on wet surfaces, wipe off all the 

water on the surface of your board, especially the charging port. Do not 

charge your board until it is completely dry. Then, run the motors so 

that the wheels are spinning for 10 minutes in order to dry the inside 

of the motors and avoid rust.

MAINTENANCE FOR UNUSED BOARD

Store your board in a dry area and fully charge your board at least once 

a month to avoid unrecoverable battery damage if you are not going to 

ride your board for a long time. 

WARRANTY AND MAINTENANCE

This board is covered by a 180 day manufacturer’s warranty that covers 

defects in workmanship and material. This does not cover damage 

caused by abuse, misuse, negligence, accidents, or riding in water.

Summary of Contents for MINI DUAL





















Reviews: