Page 10 (18)
5171
31.07.13 TB
22.10.14 TB
LTR-1200
User Manual
3 Technical Data
3.1 Elements and Configurations
Each rack enclosure is equipped and configured to the customer's specifications:
Up to four LDD-Family or TEC-Family devices can be built in (See 4 Quotation Request Form).
The number of required power supplies and fans depends on types, numbers and applications of
the built-in devices. Meerstetter Engineering equips the LTR-1200 accordingly.
The LTR-1200 is back panel configurable, the standard panel offers 4 power output terminals and
4 sensors inputs connectors. (Up to 8 Terminals are possible)
It is also possible to install third party devices. Please contact Meerstetter Engineering with your
enquiry.
Important note concerning the integration of LDD-Family devices into LTR-1200 rack enclosures:
The internal wiring from an LDD device to its back panel terminal can measure several 10cm and
represents an inductive load. Therefore, fast pulsing performance will be impaired.
3.2 Front Panel
3.2.1 LCD
The picture shows the LCD display of an LTR-1200 with 4 devices built-in.
Symbols on the LCD Display
First Symbol
(next to TEC/LDD) Device is 'Ready'
Other
(Reset, Restart,
Bootloader, …)
Device is 'Running'
Device has an
Error
Second Symbol
(if type is TEC)
Not in Temperature
Control Mode
'Wait'
(not stable, yet)
Stability Reached
-
3.2.2 Navigation
There is a five-point navigation switch available to browse through the Menu. This can be used to change
the most important settings of the internal devices.
Digital I/O
RS232
RS485
LED
USB
Ethernet
Navigation
LCD
Summary of Contents for LTR-1200
Page 2: ......