Check that the unit has not been damaged during transport
Protection Against Fire
1. Maintain a minimum of 1 foot distance from any type of flame.
2. This equipment is designed to be used only with Mega-Lite Fog Fluid
3. Replace fuse only with the specified type and rating.
4. Do Not install the unit to close to a heat source.
5. Make sure cable are properly secured away from unit movement.
6. Maximum surface operating temperature 80
º.
Protection Against Electrical Shock
1. Disconnect power before servicing.
2. For connection to main power supply proceed to page 4.
3. This unit must be earthed. (electronically grounded)
4. Do not expose unit to rain or moisture.
5. Always unplug your Cobra fogger before filling it’s tank
6. Running a fog machine with no liquid can permanently damage the unit.
Protection Against Mechanical Hazards
1. Hot fog! Keep away at least 6 feet from nozzle fog output may be hot. Do not aim output at person.
2. Make sure fogger output is not blocked.
3. Fogger output nozzle maybe hot do not touch until unit has been given ample amount of time to cool.
4. Use safety chain when hanging unit
5. Unit may release hot oil do not hang directly above a person or delicate surface.
6. Unit releases an oil base fog that may increase the risk of slipping. Do not aim devise at floor.
7. Unit surface may reach high temperature. Allow about 10 minutes after unit has been turned off be-
fore moving.
8. Never drink fog fluid. If it’s ingested, call a doctor immediately. If fog fluid comes into contact with Skin
or eyes, rinse thoroughly with water.
9. Danger of burns. Fogger must be installed out of reach of children. Never leave the unit running unat-
tended.
3
Warning!!!
To reduce the risk of fire, electric shock, or injury to person please read the user manual in
it’s entirety, and follow the above safety instructions.
