Chapter 1. Introduction
1.1 Features
NetAgent
A
is the SNMP (Simple Network Management Protocol) card for monitoring UPS.
Not only could remote control the UPS and get the current status of it, it is also support to
connect to compatible modem to send SMS notification, or our NetFeeler II and its
additional sensors for ambient temperature, humidity and water status. The product is for
“Contact Closure” and “RS232” interface UPS and the communication protocol includes
the Contact Closure, RS232[MegaTec], Phoenixtec], SEC 2400, SEC 9600, Megatec
Three Phase, ..etc. NetAgent
A
provides a simple and easy installation procedure. CD
provides along with NetAgent
A
offers several software to allow the user to configure IP
address; central monitoring and multi shutdown on different operating systems. Other
advance configurations could be accomplished in the Web browser.
Features:
(1)
Provide SNMP MIB to monitor & control UPS
(2)
Auto-sense 10M /100M/1000M Fast Ethernet Manage and configure via Telnet,
Web Browser or NMS
(3)
Support TCP/IP, UDP, SNMP, Telnet,SNTP, PPP, HTTP, HTTPS, SMTP, FTP,
Modbus, BACnet Protocols
(4)
Support SSL/TLS, SSH Encryptions
(5)
Providing easy setup and upgrade tools via our Netility software
(6)
Send SNMP TRAP ; E-mail and SMS for events notification.
(7)
Auto email daily UPS history report
(8)
Perform graceful shutdown with our ClientMate software
(9)
Add-on optional NetFeeler II for temperature, humidity, water, smoke and door
sensor
(10)
Add-on optional WiFi dongle for wireless network access
(11)
Add-on optional GPRS modem for SMS notification