Configuration > NetFeeler
NetFeeler is the external optional environmental sensor. It is to detects temperature,
humidity and water. NetFeeler has RF receiver built-in to work with extension sensors
such as smoke, security sensor.
NetFeeler
NetFeeler
Humidity/Temperature Critical value
:
To set the lowest and highest critical values for temperature and humidity. NetFeeler will
send a warning message when it detects temperature or humidity values below and above
these settings.
Security Label
NetFeeler may connect up to 7 security sensors that communicate via RF. This section is
to set the location or name of each sensor.
Configuration > System
This page is to set NetAgent
A
’s system time, language and configuration.
Date/Time
NetAgent
A
to synchronize with external or internal Time Server for correct date and time.
System Time
System Time(yyyy/mm/dd hh:mmm:ss)
:
To display the current system time/date of NetAgent
A
. Or click on Adjust Now to adjust to
the correct time/date automatically
Time Between Automatic Updates
:
To set an interval for time synchronization.
Time Server
:
Time server can be select from the drop down list , or add other time server manually.
Time Zone(Relative to GMT)
:
To select its GMT time zone
Using Daylight Saving Time
:
Select whether to use the daylight saving time system to adjust the clock for 1 hour in
advanced