1.2 Applications
NetAgent
A
allows UPS to be monitor on network
When the UPS connects with NetAgent
A
, the system manager could check each and
every UPS condition by a computer with Browser installed. The manager could monitor
and control the UPS by simply input the IP address of the NetAgent
A
which connects to
the UPS. When there is a power abnormal condition happens, the NetAgent
A
could also
send the trap information to the system manager to take proper action.
NetAgent
A
Provides Shutdown Utilities
When a computer install our shutdown software in the network that connects to the
NetAgentA, when UPS is in AC failure condition or Battery Low condition, the software
would close all the files of the operating system and shutdown gracefully. This could avoid
system corrupt when a power disconnection happened.
NetAgent
A
for Surrounding Monitoring
NetAgent
A
with USB ports could connect to optional sensor- USB NetFeeler to get the
surrounding temperature/humidity/smoke/fire signals. These information could also be
revealed on the NetAgent
A
Web page. When there is an abnormal condition happened, it
could also be sent as a trap to the system manager.
