If your eGo battery's button is not glowing when you press it, the battery is probably locked and you will
need to unlock it. If your eGo battery does not flash after rapidly pressing the button 5-7 times, you
probably are not pressing the button fast enough or it is a completely uncharged battery. It is easy to tell if
an eGo battery is not charged; the light on the charger will turn red when the battery is screwed into it.
An Assembled Mega eGo electronic cigarette has three pieces:
1.
eGo Battery:
It is the longest piece and has a button on it.
2.
Mega Atomizer:
It is cone-shaped, metal, approximately 1½ inches long and is the only piece that can
screw onto the eGo battery.
3.
Mega Cartridge:
It is translucent plastic, about 1½ inches long, has a flat tip at one end and has a fibrous
material inside the other end.
Assembling a Mega eGo Starter Kit is quite easy. Here's all you need to do:
1. Screw the mega atomizer onto the threads of the eGo battery. DO NOT SCREW THE TWO PIECES
TOGETHER TOO TIGHTLY; stop when there is any resistance. Screwing a mega atomizer onto an eGo
battery too tightly could force the post of the battery down into the battery where it will no longer be able to
make proper contact with the atomizer or the battery charger.
2. Unwrap one of the five cartridges that came with your Mega eGo Starter Kit. All of our Mega eGo Starter
Kits come with unfilled cartridges so we hope you paid attention when ordering your kit and purchased a
bottle of e-liquid. Please see the section, below, about how to fill your Mega eGo e-cigarette cartridges.
Once you have filled your cartridge, simply push it onto the open end of the atomizer (the other end should
already be screwed onto the battery).
Your Mega eGo is now assembled and ready for use!
Filling Your Mega eGo Cartridges with E-Liquid
E-Liquid (also commonly referred to as "e-juice" or "liquid nicotine") is what creates the vapor that you
inhale. When you receive a Mega eGo starter kit, there is no e-liquid in any of the cartridges, regardless of
the type of starter kit that you purchased. Because we think everyone should be able to select whatever
flavor and nicotine strength that they like, you will need to order e-liquid in addition to your Mega eGo
Starter Kit (hopefully you heeded our advice and did so).
Filling a New Mega eGo Cartridge:
1. Remove the mega cartridge from the package and also remove the protective rubber cap that is on the
"gauzy", round side of the cartridge. Throw the rubber cap away.
2. Drip e-liquid from your bottle one drop at a time onto the filler material until it begins to look like a slushy.
Typically, this is about drops with a brand new mega cartridge.
3. Push the side that you just filled onto the open end of the mega atomizer. The flat tipped side of the mega
cartridge is the side you inhale through.
Topping Off a Mega eGo Cartridge
You will need to frequently "top off" your Mega eGo e-cig cartridge when it starts drying out and not
producing as much vapor (or when it starts to taste more like an old rag). Depending on how large a drag
you take, how frequently you will have to do this varies with each individual, but typically, it's about every 50
drags or so.
1. Remove the Cartridge from the atomizer.
2. Add 6-8 drops or as many as it takes to make it look like a slushy
3. Push the cartridge back onto your eGo atomizer.
The Three Rules of a Perfectly Filled Mega eGo Cartridge
There are only three things you need to keep in mind when filling your Mega eGo e-cigarette cartridges,
whether they are brand new cartridges or you are topping one off:
1. If it looks like a piece of gauze inside, it needs more e-juice.
2. If it looks like a little pond, it has at least one drop too many (not a big deal).
3. If it looks like a slushy, it is perfectly filled!
