MEGAFLO Eco SolaReady Product Manual Download

Page: 26 / 52

COMMISSIONING

Commissioning of solar controller

Info Menu (Fig 24)
In this menu mode all measured values and operating states
are shown.
If the values are marked as “reset possible” they may be
reset as shown in figure 24.

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.

The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Figure 24

Indication

e.g.

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Meaning

Reset

possible?

75ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of current collector(s)

temperature.

min. 12ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of minimum collector(s)

temperature. Resettable to current

temperature.

Yes

max. 105ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of maxiimum collector(s)

temperature. Resettable to current

temperature.

Yes

52ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of current temperature

storage tank(s).

min. 40ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of minimum temperature

storage tank(s). Resettable to current

temperature.

Yes

max. 65ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Indication of maxiimum temperature

storage tank(s). Resettable to current

temperature.

Yes

60ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Displays current temperature.

60ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Heating, cooling, temperature

differrence controller T1-T6.
Only displayed when active.

35ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Temperature difference controller

for heat consumer. Only displayed if

temperature sensor fitted (not supplied

as standard).

25ºC

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Antifreeze sensor. Indication of universal

temperature measuring points (T6).

Only displayed if temperature sensor

fitted (not supplied as standard).

1234 h

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Operating hours for charging storage

tank(s). Resettable to 0 h.

Yes

927 kWh

11.0

Commissioning of solar controller

11.3

Menu “Info”

In this menu mode all measured values and operating states
are shown.

If the values are marked as “reset possible”, they may be reset
in the following way:

Choose the value with buttons and

Reset value by means of the button

Message “OK?” confirm with = no or = yes

Press or to scroll

up or down to the required sub function.
The icon will flash, press to
select the function. Reset by pressing

or for

increase/decrease values. Press
and appears,

press to confirm and
disappears.

ok?

75 °C

Indication of current collector(s)

temperature.

52 °C

Indication of current temperature storage

tank(s).

Temperature difference controller for heat

consumer

* Only displayed if temperature sensor

fitted (not supplied as standard).

Displays current return temperature

60°C

Heating, Cooling, Temperature difference

controller T1…T6

Only displayed when activated

Yes

Indication of minimum temperature

storage tank(s).

Resettable to current temperature.

Antifreeze sensor

Indication of universal temperature

measuring points (T6).

* Only displayed if temperature sensor

fitted (not supplied as standard).

Yes

Operating hours for charging storage

tank(s).

Resettable to 0 h.

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Reset

possible?

Indication of minimum collector(s)

temperature.

Resettable to current temperature.

Indication of maximum collector(s)

temperature.

Resettable to current temperature.

25 °C

Meaning

Indication of maximum temperature

storage tank(s).

Resettable to current temperature.

max

65°C

min

40°C

927 kWh

min

12°C

Indication

e.g.

max

105°C

1234 h

60°C

35°C

Fig. 29

Energy productivity for storage tank(s).

Resettable to 0 h.

Yes

Summary of Contents for Eco SolaReady





















































Search results

Summary of Contents for Eco SolaReady

Reviews:

Related manuals for Eco SolaReady

Brands by name

Popular brands

MEGAFLO Eco SolaReady, Product Manual

Search results

Summary of Contents for Eco SolaReady

Reviews:

Related manuals for Eco SolaReady

Brands by name

Popular brands