background image

                                                                                                                     

 
F. ACTIVE ARMING – LOCK & ARM: 

1. Press 

  button on the transmitter. 

2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The 

vehicle door will lock and dome light turns on for 10 seconds upon arming when interfaced with the 
security system. 

 

       

System Arm 

       

 

     

Door Ajar 

     

 

    Trunk / Hood Ajar 

       

 

AJAR WARNING: 

If the 

siren sounds 3 chirps, then 
you have left a door, trunk, 
or hood lid ajar. (See Alarm 

Feature

 “I 

Programming)

 

SILENT ARMING / DISARMING:

 

Press the transmitter 

 

and

 

 

buttons at the same time will arm or 

disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the 
vehicles parking lights only. 

SHOCK SENSOR BY-PASS: 

Press the 

 

button on the transmitter two times within 3 seconds will arm the 

security system and by-pass the shock sensor. The system will chirp one additional time to confirm the 
sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one arming 
cycle only. The security system will return to normal operation during the next arming cycle. 

HIDDEN ALARM FUNCTION:

 Press the 

 

button first; within 3 seconds press the 

 

button to activate the 

hidden alarm function. The security system will arm and with “Hidden Alarm Function”. The siren / horn will be 
silenced even if the sensor is triggered in the armed status. 

G. PASSIVE ARMING 

Active arming / disarming is controlling your security system via the remote transmitter. This security system 
is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds 
after the last door is closed. Operation is as follows.   

1. Turn the ignition to the “OFF” position and exit the vehicle. 
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any 

door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle 
all entrances are closed. 

3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1] 

time and the parking lights will flash [1] time. 

PASSIVE ARMING WITH PASSIVE DOOR LOCKING 

(See Alarm Feature

 “I 

2” 

Programming): 

    The vehicle doors will automatically lock after passive arming cycle has been completed. 

PASSIVE ARMING BY-PASS: 

While the system disarmed, Press the 

 button twice, the security will 

respond with [1] chirp and LED will turn “ON”. The security system will remain in this temporally state for as 
long as you wish. To exit passive by-pass, press the transmitter 

 

or 

  button and the system will return 

to normal status.   

H. ACTIVE DISARMING – UNLOCK & DISARM: 

1. Press 

  button on the transmitter. 

2. The siren will chirp 

once

 and parking light flash 

once

 to indicating that the security system is now 

disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon disarming when 
interfaced with the security system. 

 

System Disarm 

   

Trunk/Hood Trigger 

     

Doors Trigger 

 

Shock Sensor Trigger 

 

 

 

Ignition Trigger 

           

     

 

TAMPER DISARMING

: If alarm triggered, upon disarm the system, siren chirp 4 

times, parking light flash 3 times.

 

PATHWAY ILLUMINATION 

(See Alarm Feature

 “II 

4” 

Programming): This 

feature turns the parking light “ON” for 30 seconds upon a unlock signal and for 
10 seconds upon the lock signal.

 

   

4

Summary of Contents for MEGA 2700













Reviews: