AUGUST/30/2004
will clear the flash icon on
the LCD screen
transceiver.
AJAR WARNING:
If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar. (See Alarm
Feature
5
Programming)
SILENT ARMING / DISARMING:
Press the transmitter
and
buttons at the same time will arm or
disarm your security system, No chirp sound will be heard, arm / disarm confirmation will be through the
vehicles parking lights only.
SHOCK SENSOR BY-PASS:
Press the
button on the transmitter two times within 3 seconds will arm the
security system and by-pass the shock sensor. The system will chirp one additional time to confirm the
sensor bypass mode was activated. The sensor bypass feature is programmed to activate for one arming
cycle only. The security system will return to normal operation during the next arming cycle.
E. PASSIVE ARMING
Active arming / disarming is controlling your security system via the remote transmitter. This security system
is equipped with an optional Passive Arming feature, which allows the security system to arm 30 seconds
after the last door is closed. Operation is as follows.
1. Turn the ignition to the “OFF” position and exit the vehicle.
2. After all entrances are closed, the security system LED will flash fast for 30 seconds. If you reopen any
door / hood / trunk, the security system LED will stop flashing. It will begin flashing again once the vehicle
all entrances are closed.
3. After 30-second timer has elapsed, the security system will automatically “ARM”. The siren will chirp [1]
time and the parking lights will flash [1] time.
PASSIVE ARMING WITH PASSIVE DOOR LOCKING
(See Alarm Feature
2
Programming):
The vehicle doors will automatically lock after passive arming cycle has been completed.
F. ACTIVE DISARMING – UNLOCK & DISARM:
1. Press
button on the transmitter.
2. The siren will chirp twice and parking light flash twice to indicating that the security system is now
disarmed. The vehicle’s door will unlock and dome light turns on for 30 seconds upon disarming when
interfaced with the security system.
System Disarm
Doors Trigger
Trunk/Hood Trigger
Shock Sensor Trigger
Ignition Trigger
CLEAR THE FLASH ICON:
Press the
button 3 times within 3 seconds will clear the flash icon on
the LCD screen transceiver.
TAMPER DISARMING
: If alarm triggered, upon disarm the system, siren chirp 4 times, parking light flash 3
times.
TWO STEPS DOOR UNLOCK
(See Alarm Feature
3
Programming): This feature will independently unlock
the driver’s door only when disarming the security system. Pushing the
button a second time within 3
seconds will unlock the other doors.
AUTOMATIC RE-ARM
(See Alarm Feature
6
Programming): If this feature is selected, the security system
will automatically re-arm itself in 60 seconds after disarming with remote transmitter. Automatic rearm will
cancel if any door is opened before the 60 seconds timer has elapsed.
G. DISARMING WITHOUT A TRANSMITTER
( Alarm Feature
7
Programming
)
OVERRIDES THE ALARM WITHOUT PASSWORD PIN CODE:
(Factory Default Setting)
The Override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to 'ON’ position. (Alarm will sound.)
2. Within 10 seconds push and release the valet switch
The alarm will stop sounding and enter the disarm mode. You can now start and operate the vehicle
normally.
MEGA3700OP
3
