3. Bottom panel Assembly
a). Loosen, but do not remove the screws that are
pre-assembled on the side of the bottom panel (F),
align the holes on the cart leg, front left (M) and cart
leg, rear left (N), then place the cart legs onto the
screws that were loosened in the bottom panel (F) as
shown in Fig. 4.
b) Tighten the screw from outside to inside, there is a
hole in the outside of the cart leg. As shown in Fig. 4.
c) Repeat step 3a and 3b to attached right legs to the
bottom panel, make sure all screws are tight.
Fig. 4
Fig. 5
14
4. Cart frame Assembly
a). Loosen, but do not remove the screws that are
pre-assembled on the cart leg, front left (M) and Cart
leg, front right (O). Attach Cart leg, front left (M) and
Cart leg, front right (O) to the Cart Frame (L) ,by
aligning the holes on the cart frame (L), tighten the
screws that were loosened above. as shown in Fig. 5.
Fig. 6
5. Door Triangle Bracket Assembly
a) Loosen but do not remove four screws mount the
Left Side Panel (D) and Bottom Panel (F),
two screws on cart Right Side Panel (E)
and two on the Bottom Panel (F). Align the
holes of the left triangle bracket (Z) with screws on
Left Side Panel (D) and Bottom Panel (F).
Then tighten the screws as shown in Fig. 6.
b) Repeat the steps a) for attaching the
triangle bracket (AA) to the Right Panel (E) and
bottom Panel (F)
F
M
N
M
M
L
Z
AA
F
D
E
