6
INTRODUCTION
Congratulations for choosing this high-quality MEGANEX product! We hope it will
be of great help to you. Remember to read the instruction manual before using
the appliance for the first time in order to ensure safe usage. If you have any
doubt or problems, please contact your dealer or the importer. We wish you safe
and pleasant work with this appliance!
SAFETY INSTRUCTIONS
READ THESE INSTRUCTIONS CAREFULLY AND NOTE THE SAFETY INSTRUCTIONS
AND WARNINGS. USE THE APPLIANCE CORRECTLY AND WITH CARE FOR THE
PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
TO PROPERTY AND/OR SERIOUS PERSONAL INJURY. KEEP THIS INSTRUCTION
MANUAL SAFE FOR FUTURE USE.
-
This appliance can be used by children aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning use of the appliance in a safe
way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
-
Do not operate the jack on inclined surfaces. The jack must be used on level surfaces only.
Unanticipated motion will occur as soon as the jack lifts the tire from the surface.
-
Do not overload the jack beyond its rated capacity (680 kg per unit).
-
Do not start the vehicle’s engine or drive when the jack is in use. This jack is designed for
hand manoeuvring of vehicles only.
-
Do not use the jack to lift tires wider than 310 mm.
-
Do not attempt to push the jack over obstacles. Jacks are designed to be used on level
surfaces only.
-
After lifting, be sure to always lock the pin in place before operating. Pull the pin out after
finishing the work and then release the valve.
TECHNICAL DATA
Max. capacity:
680 kg/unit
Weight:
18 kg
PRODUCT DESCRIPTION
This hydraulic positioning jack is designed for hand maneuvering of vehicles.
OPERATION
-
Place the jack on the floor and press down the pedal to release the pedal lock. Pull out the
lock pin from the frame.
-
Before operating, open the release valve by turning the thumb screw counter-clockwise.
Expand the jack by the thumb screw enough to place it around the tire and position it so
EN
