background image

IMPORTANT 

 

 

 

 

READ THESE INSTRUCTIONS CAREFULLY AND NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO 

DO SO MAY CAUSE DAMAGE TO PROPERTY AND/OR SERIOUS PERSONAL INJURY. KEEP THIS INSTRUC-

TION MANUAL SAFE FOR FUTURE USE. 

 

1. SAFETY INSTRUCTIONS AND WARNINGS 

 

 

 

 

-

 

Read and understand all warnings and instructions before use. 

-

 

Extreme caution should be followed when working with this or any other hydraulic unit. 

-

 

Follow the jack’s rated capacity. Do not overload the jack. Overloading may result in jack failure, serious injury 

and/or property damages. 

-

 

This jack is designed only for lifting. Do not use it for prolonged supporting works or any other lifting. 

-

 

Inspect the jack before each use. 

-

 

Do not operate the jack on inclined or uneven surfaces. The jack must only be used on hard and level surfaces 

which are capable of sustaining the load. 

-

 

Center the load on the saddle before lifting. 

-

 

Lift only on areas of the vehicle as specified by the vehicle manufacturer. 

-

 

Do not modify the jack’s structure or operation in any way. All modifications are strictly forbidden. 

-

 

Failure to follow these warnings or instructions may result in personal injury and/or property damage. 

 

WARNING: The warnings, cautions and instructions discussed in this instruction manual cannot cover all possible 

conditions and situations that may occur. It must be understood by the operator that common sense and caution are 

factors which cannot be built into any product, but must be supplied by the operator. 

 

2. SPECIFICATIONS 

 

 

 

 

Max. Capacity 

1000 kg 

Power type 

Hydraulic 

Jacking mechanism 

Ram piston 

Overload protection 

Yes 

Quick release system 

Yes 

Min. height 

210cm 

Max height 

780 cm 

Weight 

75 kg 

 

 

3. PROCEDURES BEFORE LIFT 

 

 

 

 

WARNING! Always perform the following procedures before each lift. 

 

-

 

Thoroughly inspect the jack for damages or wear and test the jack operation without any load. If the jack is dam-

aged or is malfunctioning, do not use it until the problem is corrected. 

-

 

Consult the vehicle owner’s manual for safety precautions, jacking procedure, vehicle weight, recommended jack 

type, location of the jack support areas on the vehicle and other necessary information. Lifting capacity of this jack 

is 1000 kg. Never exceed jack’s lifting capacity. 

-

 

Keep children and other bystanders away from the work area during lifting. However, another adult should be 

nearby for extra safety and assistance for possible emergency situations. 

-

 

Children or persons with impaired functional capacity are not allowed to use the jack.  

-

 

Clear all needless objects from the work area. Working in cramped or cluttered areas is dangerous. 

-

 

Make sure the jack and vehicle are on a solid, level ground such as a paved driveway or garage floor. Uneven or 

sloped surfaces create hazardous working conditions. 

-

 

Set the vehicle’s hand brake on and shift the gear to lowest driving gear. Turn off the vehicle engine. 

 

GB 

 

Summary of Contents for MEG82










Reviews: