29
TECHNICAL DATA
Motor
230V
~
50Hz, 250W
Cycle time
7 s (when the wheel weight is about 20 kg)
Balancing speed
230 rpm
Accuracy
±2 g
Maximum wheel weight
70 kg
Rim diameter
10”–24” (254–610 mm)
Rim width
1,5”–20” (38–508 mm)
Operating temperature
0–50˚C
Dimensions
H1460 x W1200 x D1000 mm
Weight
90 kg
PARTS
1.
Power cord
2.
Return spring
3.
Cone storage
4.
Operation switch
5.
Scale
6.
Control panel
PRIOR TO USE
The operating conditions must comply with the following requirements:
-
The floor must be even, level and stable and preferably made of concrete or tiled.
-
There should be enough space around the machine to be able to use it easily (see the
picture below).
-
Lightning should be adequate.
-
Do not expose the machine to extreme temperatures or humidity.
-
Protect the machine from sunlight, rain and wind.
-
The air must be clean next to the machine.
-
Do not place the machine near explosive, corrosive and/or toxic substances.
-
The operator must see the machine and its surroundings completely from the point of
operation. Keep persons and objects well clear of the danger zone
.
7. Display
8. Weight tray
9. Hood
10. Balance shaft
11. Body
12. Power switch
