2 6
S e t t i n g s > C a m e r a S e t u p
M o n i t o r a n d c o n f i g u r e t h e M E G A p i x ® c a m e r a t h r o u g h a b u i l t - i n w e b
v i e w e r .
General: This section allows you to adjust the camera’s lens, iris and day/night mode.
1. Lens – Sets the type of the Lens. Select from Fixed, Fisheye, Varifocal or MFZ. Please note
that options may not be available based on the camera’s model and lens.
2. Iris – sets the type of the Iris (on supported cameras).
3. CDS >> Type – sets the type of the CDS from internal or none. The CDS affects the day/ night
transition.
4. CDS >> Range >> Min & Max – Marks the light level at which the camera will switch between
color and B/W. Set the minimum
and maximum values for the CDS
threshold. Default values are
mentioned next to the drop-down
menu.
5. IR – You can manually activate
the cameras IR LED board.
Select Built-in to activate the IR
LEDs in the camera when low
light is detected. If you are using
an external light source, or the
camera’s own IR LEDs interfere
with other LEDs in the system,
you can set it to non, and
manually disable it.
6. ICR – This allows you to set the
camera’s day/night mode. You
can select to keep the camera in
color or B/W regardless of the
lighting conditions, or set to auto.
If auto is set, the camera will
switch between color and B/W
according to the CDS settings set
above.
WEBVIEWER*
g
Camera Setup
Summary of Contents for PANO DWC-PF5M1TIR
Page 5: ...PARTS DESCRIPTIONS 5 ...
Page 6: ...DIMENSIONS MM 6 43 8 1 72 ...
Page 7: ...INCLUDED IN THE BOX 7 ...
