Preparing for the installation
Preparing for the installation
Preparing for the installation
Preparing for the installation
Install Tools and Materials
The antenna system is designed for simple installation and setup. However, the following list
of equipment or items should be available during installation of the antenna.
■
Electric drill and drill bits
■
Socket wrench
■
Silicon sealant
■
Fastener suitable for specific application
1. Verification of the Vessel’s Power Supply.
■
Confirm that the vessel’s power supply is 12VDC~24VDC.
2. Verification of the Satellite Receiver and IDU’s attachment and the electricity supply
■
Attach Satellite Receiver and IDU in the interior of the vessel or the trunk.
■
Connect the power of Satellite Receiver and IDU.
■
Once the power of Satellite Receiver and IDU is verified, it confirms that both
Satellite Receiver and IDU are working normally.
3. Procedure of the satellite’s attachment and installation.
■
Attach the satellite on the flat surface area of the vessel’s roof.
■
Connect each end of the Coaxial antenna cable to the satellite’s terminal and the IDU.
■
Connect the IDU and the Satellite Receiver box together through the coaxial cable.
■
Make sure that the satellite is working normally, once the power is supplied.
Warning :
Things to consider when installing the antenna.
■
Turn off the power
when attaching or detaching the
antenna.
■
Make sure that the attached satellite is fixed
on the flat
surface.
■
When attaching, ensure that all the products are adhered
properly.
■
Ensure that all the cables are connected properly.
