8
3. Sewing speed and direction of hand wheel
馬達轉速和手輪輪轉動方向
3000 RPM is regular sewing speed, and 4000 RPM
is maximum sewing speed.
Run a new machine at a speed of 15-20 % lower than
maximum sewing speed during the first 200 hours
(for about one month) so that the machine can last
longer in good condition.
The rotation of the motor pulley (hand wheel)
①
is
in clockwise direction from the operator side. (Fig.14)
機器轉速平常使用3000轉,而4000轉為最高速
新機器在前200個小時(約一個月左右)使用2650 -
Fig. 14
2800的轉速,這樣可以延長機器使用壽命。
手輪
①
的運轉方向從作業員的角度是順時針。
(
圖
14)
If rotaing in reverse direction, oil can not be provided
properly, and the machine will be probably damaged.
如果運轉方向相反,油無法供應,會造成機器損
壞。
CAUTION
注意
Summary of Contents for MJ101TX
Page 1: ......
Page 4: ...1 1 Name of each part Fig 1...
Page 5: ...2 2 Installation 2 1 Installation 2 1 2 1 1 Tabletop type 2 1 1 Fig 2...
Page 45: ......