page
3
4 Turn on the GPS device. (
Turn on backup battery switch
or
connect an external
Power
as figure1)
（
Note: Must make sure it has
enough power
when you use backup battery
switch
）
5 Connect the USB cable between tracker and computer.
6 Check the hardware info at the
Control panel
à
Systems
à
Hardware
à
Device
Manager
and locate prolific
USB-to-Serial Com Port
.
(Must remember the port number because you will use it in later steps
，
if
you didn
’
t see any USB-to-serial port, please
reconnect
the USB cable.)
7 Execute file
“
TrackerSetup-V1.0.X.exe
”
, and an interface will appear as below.
USB-to-serial port
is COM4
