Megatherm wood-pellet burner
MPB 90 Pro
automatically causes switching on of the lately used working mode.
In the table beneath a short description of particular functions of the burner, activated
depending on the working mode of the driver, is shown.
FUNCTION'S
NAME
DESCRIPTION OF FUNCTIONS
STOP
Burner stopped.
FEEDER FILLING
Filling the feeder.
Filling stops automatically after about 10 minutes.
IGNITION
Ignition of pellet. The mode would be automatically changed after
detecting a flame by the sensor.
CLEANING
The cleaning of the burner from he left ashes. The cleaning function
also as a blow down before ignition.
WORK
Heating the boiler up to the set temperature. Showing the actual
power of the burner.
MAINTAIN
Sustaining the set temperature (if the burner's working mode is in
the mode of continuous work)
BURNING OFF
Putting off the burner. Active in the
“STOP”
mode or in the
temporal working mode of the burner.
STANDBY
Standby of the burner for the decline of the temperature of a
hysteresis (if the burner's working mode is in the temporal mode).
10