Megatherm wood-pellet burner
MPB 90 Pro
14. Cleaning burner's chamber
1. The burner can be either at “
Work
” or “
Maintain
” or “
standby
”
2. Press the button “
MODE
/ “ continuously till “
STOP
MODE
” appears on the screen.
3. It is written “
Burning
off
” till the photo sensor stops to detect fire (3-5 min)
4. When he photo sensor stops to detect fire, “cleaning procedure takes place for few
seconds.
5. When “
Stop
” appears on the LCD screen, waiting few minutes till the burner cools
down.
6. Open the boilers door, clean the burners tube and close back the door.
7. By pressing the button “
MODE
/ “ once changes the operation from “
Stop
” to
“
ignition
”. By pressing the button “
MODE
/ “ changes the operation from
“
Ignition
” to “
Automatic
”.
15. Restart the burner after an error
1. Turn off the burner by pressing the button ON/OFF
2. Open the boiler's door and check the burners tube.
3. Remove any ashes and impurities from burners tube.
4. Close the door and switch on the controller by pressing the button
5. By pressing the button “MODE/ “ once changes the operation from “Stop” to
“ignition”. By pressing the button “MODE/ “ changes the operation from “Ignition”
to “Automatic"
16.
Feeder's filling procedure
1. Remove the plastic tube connection the burner with the feeder
2. Reset the controller by pressing the button
3. “Stop” appears on the LCD scree
4. By pressing the button “MODE/ “ once changes the operation from “
Stop
” to
“
ignition
”.
5.
“CHOICE FUNCTION-/+”
appears on the LCD screen
6. Press the button to start the feeder
7. Feeders operation lasts 11min (Manufacturer's setting / Feeder's filling time"
8. When the wood-pellet starts to come out of the feeder, switch off the controller.
21