3 HOW TO RIDE
It is highly recommended to begin your first scooter experience with
the help of a friend. Having a helping hand during initial use will
increase your confidence and help you become acclimated to your
scooter. Besides, always wear the proper safety gear before riding the
hoverboard.
Before operating, charge your MEGAWHEELS unit with the included
power adapter. Charge time can take up to 90-120 minutes.
Put the hoverboard on the horizontal floor or table, keep it level. Press
and hold the power button, then you will hear a beep voice, the battery
indicator light will light up in green, which indicate that the unit is on.
07
3.1 RIDING INSTRUCTIONS
Step 1- Put on your Safety Gear
Step 2 -Getting Started
On the top of the board, there are two indicator lights: Battery power
level indicator light and system indicator light. When the board is on,
the battery power level indicator light should be lit, indicating there is
power to the device.
A. Battery Power Level Indicator:
The Green LED light indicates that the scooter is fully charged, while
red LED light indicates the power is down to 10% or less, then you will
need to recharge the device.
Step 3- Checking The Status
Helmet
Elbow Pads
Wrist Guards
Knee Pads
Wear all proper safety gear that you have,
including, but not limited to a helmet, knee
pads, elbow pads and wrist guards.
