B. System Indicator:
When the gyroscope on pedal is triggered, the green system indicator
light will light up, which means that the system work correctly. When
the system has an error during operation, the system indicator light will
turn red and the system will alert the rider with a "beep" voice.
Step on one pedal to trigger the sensor, the system will enter
self-balancing mode. Then step on the second pedal with your other
foot quickly.
08
Step 4- Step on the board
Stand upright but relaxed. Do not make any sudden or jerky movements.
The MEGAWHEELS
®
has 4 sensor points on the sides of both pedals that
nearby wheels. When the rider steps on a pedal, the MEGAWHEELS
®
will
adjust itself to balance automatically.
If the board does not seem to work, check to be sure your feet are on
pedals near the wheels to trigger the sensors.
If the MEGAWHEELS
®
does not enter self-balancing mode when triggering
the sensor, the System indicator will turn red and flashing, together with
"beep" voice. DO NOT operate the MEGAWHEELS
®
under these
conditions. Please power the unit off and back on again. If this fails resolve
the issue, re-calibrate the board by following the
Calibration Instructions
on Section 3.3.
Step 5- Staying balanced
Blue LED lights
(A) Battery Power Level Indicator
(B) System Indicator