Front Panel Controls
All Megger Baker ADX testers feature a large, 10.4-inch touch screen that displays the graphical user interface. The
interface features a logical layout of large touch icons that improve ease of use.
The units come with a Push-to-Test (PTT) button used during manual coil tests, and a variable voltage output ramp
switch to apply voltage during surge, coil, and DC tests.
In the lower right corner, an easily accessible E-Stop button quickly shuts off power to the unit’s high-voltage
circuitry during DC and Surge testing when needed.
Fig 5:
Front panel controls and features—ADX15.
No
Description
1
Power On/Off button. The button has three modes of operation:
Screen sleep— Quick press-and-release.
Controlled shut-down or restart—Press one second and release then press Power Off or
Restart.
Hard power down—Press and hold for approximately 5 seconds.
2
ADX model. Model number also indicates maximum output voltage (in kV).
3
Push-to-test (PTT) button.
4
Voltage output ramp switch.
5
Test Lead active LEDs. When LEDs are lit, indicated test lead is energized.
6
Armature Test Lead active LED. When LED is lit, armature test lead is energized.
7
USB 2.0 connectors.
8
Equipment stop (E-Stop) button. See “Equipment Stop Button” in the “General Operating and Safety
Information” chapter for more information.
www.megger.com/baker
Megger Baker ADX Quick Reference Guide
10
Front Panel Controls
