To adjust the screen angle of the ADX, you can raise the kickstand found below the unit.
CAUTION: Be very careful when setting up and using the kickstand to prevent injury to hands, fingers,
or other body parts. Be careful when moving the ADX to prevent damaging the unit.
1. This process is best done with test leads detached. Use the side handles to lift the ADX upright.
2. Carefully support the ADX on its back bumpers to unlock the kickstand from the bottom of the unit.
3. Press fingers into the kickstand bottom edge to release it.
Fig 31:
Place ADX upright on back bumpers.
4. Fully unfold the kickstand towards the front face of the unit to ensure a safe resting position. Carefully lower the
unit into its resting position, ensuring that the back bumpers are in full contact with the work surface.
5. Ensure that the front edge of the kickstand is fully extended and in full contact with the work surface.
Fig 32:
Kickstand raised for easier viewing at steeper angles.
www.megger.com/baker
Megger Baker ADX Quick Reference Guide
32
Procedures for Testing with the ADX Analyzer
