SAFETY PRECAUTIONS
AVTMMIT30-EN Rev E02 June 2009
5
Equipment) as required by local regulation or
company Electrical Safety Rules. As a routine
safety procedure however, rubber safety gloves
should be worn when making connections to any
high voltage terminals. Some users are required by
work rules to wear safety gloves when
manipulating the controls; Megger considers this
an excellent safety practice.
WARNING
Do NOT use the MIT30 test set
for any purpose not described in
this instruction manual and do
not use accessory items for any
purpose except with the
specified equipment.
Before operating read and follow
the instruction manual.
Equipment operators must read this manual in its
entirety prior to energizing the MIT30. Megger
strongly recommends that users conduct a mock
test, using a test object to familiarize themselves
with the equipment as well as to assure proper
equipment operation prior to conducting an
actual test.
WARNING
Equipment operators should
open the case pressure
equalization valve if large
changes in ambient air pressure
(altitude) are expected. The
valve should be closed at all
other times to prevent moisture
and debris infiltration.
Summary of Contents for MIT30
