Megger MIT415/2, User Manual

REPAIR AND WARRANTY

The instrument circuit contains static sensitive devices, and care must be taken 
in handling the printed circuit board. If the protection of an instrument has 
been impaired it should not be used, and be sent for repair by suitably trained 
and qualified personnel. The protection is likely to be impaired if, for example, 
the instrument shows visible damage, fails to perform the intended measure-
ments, has been subjected to prolonged storage under unfavourable conditions, 
or has been exposed to severe transport stresses.

New Instruments are Guaranteed for 3 Years from the 

Date of Purchase by the User

Note:

 Any unauthorized prior repair or adjustment will automatically 

invalidate the Warranty.

Instrument Repair and Spare Parts

For service requirements for

Megger

®

 Instruments contact :-

Megger Limited  

or Megger

Archcliffe Road    

Valley Forge Corporate Center

Dover  

2621 Van Buren Avenue

Kent,  CT17 9EN 

Norristown, PA 19403

England 

 U.S.A. 

Tel:  +44 (0) 1304 502243 

Tel:  +1 (610) 676-8579 

Fax: +44 (0) 1304  207342    

Fax: +1 (610) 676-8625  

or an approved repair company.

Returning an Instrument for Repair

If it is necessary to retun an instrument for repair, a Returns Authorisation 
number must first be obtained by contacting one of the addresses shown. 
You will be asked to provide key information, such as the instrument serial 
number and fault reported when the number is issued. This will enable the 
Service Department to prepare in advance for the receipt of your instrument, 
and to provide the best possible service to you.

The Returns Authorisation number should be clearly marked on the 
outside of the product packaging, and on any related correspondence. 
The instrument should be sent, freight paid to the appropriate address. If 
appropriate a copies of the original purchase invoice and of the packing 
note, should be sent simultaneously by airmail to expedite clearance through 
customs.

For instruments requiring repair outside the warranty period a repair 
estimate will be submitted to the sender, if required, before work on the 
instrument commences.

Approved Repair Companies

Megger operates fully traceable repair and calibration facilities complemented 
by a network of approved repair and calibration companies, to offer excellent 
in-service care for your Megger products. Megger’s streamlined Returns 
Authorization system ensures your product is expected and enables you to 
track its progress on-line.